iNEMI Packaging Tech Topic: Considerations for Application-Specificand General Qualification of Electronics

iNEMI Packaging Tech Topic Series

Considerations for Application-Specific and General Qualification of Electronics

David Locker, Jr., U.S. Army Aviation & Missile Center
May 17, 2022


The qualification of an electronic device requires consideration of the application life cycle profile (stresses from environments and operation) and the relevant failure mechanisms of the device exposed to the application stresses. To fully characterize the performance in the application, the qualification must also account for the failure distribution of the various relevant failure mechanisms and the synergistic effects of the different mechanisms.

In this webinar David Locker, who has served as an electronic components engineer supporting U.S. Army programs for more than 30 years, will discuss methods to address these factors in determining qualification and performance characterization requirements. He will also talk about determining whether a given set of qualification data meets a particular application requirement. Get additional details.


This webinar is free and open to industry; advance registration is required (see link below). If you have any questions, please contact Masahiro Tsuriya (

May 17, 2022

9:00-10:00 a.m. EDT (Americas)

3:00-4:00 p.m. CEST (Europe)

9:00-10:00 p.m. CST (China)

Register for this webinar

About The Author

thumbnail TrustedParts x B